00852-5337 2008 

You have no items in your shopping cart.

Subtotal: $0.00

Wednesday = University Day!

More Views

Wednesday = University Day!

Be the first to review this product

Wednesday = University Day!

For any university students or teachers can buy this product with 20% discount today.
REPRAPPER TECH knows university doing lots of fundamental research that support us apply to real world. In order to appreciate their hard work, REPRAPPER TECH offers 20% discount of one product on every Wednesday. So you can say Wednesday = University Day!
You can order the product directly and fill a little more information about your University and your role.

Availability: In stock

Special Price $23.20

Sale: $29.00

With this product, you earn 24 loyalty point(s).

Product Details

Details

University Day!

Wednesday = University Day!

For any university students or teachers can buy this product with 20% discount today.

REPRAPPER TECH knows university do a lot of fundamental research that is applicable in real world. In order to appreciate their hard work, REPRAPPER TECH offers 20% discount of one product on every Wednesday. So you can say Wednesday = University Day!

You can order the product directly and fill a little more information about your University and your role.

 

RepRapper PETG Filament

REPRAPPER PETG 1.75mm 3D printing filament is one of the best, most consistent and most tested PETG filament that is compatible with MakerBot 3D printer, UP 3D printer, Afinia 3D printer, solidoodle 3D printer.

Specification:

3D printer filament parameter

Data

Material

PETG

Color

Red

Diameter

1.75mm

Tolerance

+/-0.04mm

Printing temperature

230~260

Net weight

1kg

Spool size

200mm diameter, 55mm hub, 65mm height

Gross weight

1.5kg

Package

Vacuum sealed, individual box

 

Features:

  1. Straw spool which more environmental friendly and nice appearance. We are the only one using this spool over the world.
  2. Filament is not only compatible with all 1.75mm 3D printers without lock key, the spool size is also suitable for MakerBot replicator 5th generation.

 

Why PETG?

There are some reasons why you need PETG

  1. Transparent
  2. Low wrapping

Applicability:

RepRapper PETG 3D printing filament is compatible with MakerBot 3D printer, UP 3D printer, Afinia 3D printer, Solidoodle 3D printer etc. without lock key of their filament with 1.75mm diameter.

 

Why us?

1)    Direct manufacturer, top 3D printer supplier's top choice.

2)    With reputation of innovation on 3D printer field over the world.

3)    Not only tight quality control on products itself, the more important is the systematic quality control on the whole supply chain.

4)    Fast delivery. Ship out products within 5 days for all color and material if less than 1000 kg.

5)    Spool can be customization but need longer time.

6)    Accept OEM/ODM over the world for large order.

7)    Unconditional return(Buyer need afford delivery cost if no quality issue)

 

Though we recommend you using REPRAPPER brand filament, but not means you must buy from us directly. We also recommend you buy our reseller in your local region to save the deliver cost. Of course buying from us also welcome.

 

In order to get a successful printing journey, you can view the following tips for reference.

Tips:

How to get a perfect printing model?

In fact you want to get a perfect printing model, you need a reliable printer with the 3D printer at right temperature under right parameter setting. It means that your printer should under good condition; your filament should be good enough. The following tips are based on this question.

Tip 1: What is your idea printing temperature?

In fact different printer series and different printer sensor has different temperature tolerance. Regardless sensor difference, the printing temperature of REPRAPPER Nylon filament is 230~260℃, the idea temperature is 230℃. Different color has little variance. The printing temperature of REPRAPPER PLA filament is 170~240℃, the idea temperature is 210℃. Different color has little variance.

For UP and Afinia printer, you can use it directly under ABS or PLA mode (Depends on what material you bought). For Makerbot etc printer that allows you change the temperature, you can set a temperature (e.g. 230℃), then extrude the filament manually before printing. If you saw the filament can flow up smoothly without bubble, it means that temperature is ideal setting.

Tips 2 How to avoid printing parts tilt?

It is very important for the first layer. You want to get a successful printing model you need to assure the platform is leverage. If the platform is not leverage the probability of tilt will increase. Before you begin your job you need to confirm the nozzle to all platform distance is the same.

The filament can be stick on ABS board/ solderless breadboard/3M 2090 tape/Kapton tape etc.

When you printing, the closer between nozzle to platform the better but should not break the platform.

Tips 3. How to avoid PLA jam at nozzle?

We have study on this. The printing temperature and extruder design are critical on this. If print at high temperature, the PLA will soft and the extruder can not push the soft melt PLA out of nozzle because the filament will not strong enough to push the melted PLA. It will bent. The extruder design also very important, if the inner surface is not smoothly enough or the diameter is not big enough, it will cause the same issue. It is not relate with filament itself. At least our filament can get good printing results.

Tips 4. How to avoid printing failure?

Before you begin your job, you need to confirm:

1)   The filament is good, no clog and with consistence diameter. Wired well. 

2)   The filament feed system can feed the filament smoothly to avoid lack of filament in the extruder during printing.


During printing you need to confirm:

1)   The temperature is ideal and the extruded filament at nozzle is smoothly without bubble.

2)   The first layer is OK as mentioned above.

If you avoid these issue but your still print failure parts, it may caused by your printer’s reliability. According our experience, the distinguish of a good printer or bad printer is their reliability. For FDM mode printer, for one or two model, all printing results is similar regard the surface. But when print 100 times will them success 100 times is the make difference point. For example, for Z axis movement, if your setting is 0.2mm, will they move 0.2mm exactly? If higher than 0.2mm the extruded filament may not stick to the near bottom printing model. If less than 0.2mm it may make the nozzle touch the printed model. Both of that will cause failure printing.

Printing results:

 

The next week’s University day is 2016/8/24. See you next Wednesday!

 

Now starting your 3D printing journey!

REPRAPPER, Beyond Imagination through Innovation

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Payment Methods

Credit Cards we accept:












Payment Services:









You May Be Interested In The Following Products