RepRapper T-Glass Filament
REPRAPPER T-Glass 1.75mm 3D printing filament is one of the best, most
consistent and most tested T-Glass filament that compatible with MakerBot
3D printer, UP 3D printer, Afinia 3D printer, solidoodle 3D
printer.
Specification:
3D printer filament parameter
|
Data
|
Material
|
T-Glass
|
Color
|
Nature
|
Diameter
|
1.75mm
|
Tolerance
|
+/-0.04mm
|
Printing temperature
|
190~240℃
|
Net weight
|
1kg
|
Spool size
|
250mm diameter, 52mm hub, 40mm height
|
Gross weight
|
1.5kg
|
Package
|
Vacuum sealed, individual box
|
Features:
- Straw spool which more environmental friendly and nice appearance.
We are the only one with this spool over the world.
- Filament function not only compatible all 1.75mm 3D printer
without lock key, the spool size also suitable for MakerBot replicator
5th generation.
Why T-Glass?
There are some reasons why you need T-Glass.
- Smooth surface.
- Can be printed with large size without wrapping.
- Environmental friendly that can be biodegrading.
Applicability:
RepRapper T-Glass 3D printing filament compatible with MakerBot 3D
printer, UP 3D printer, Afinia 3D printer, Solidoodle 3D printer etc
who without lock key of their filament with 1.75mm diameter.
Why us?
1) Direct manufacturer, top 3D printer supplier's
top choice.
2) With reputation of innovation on 3D printer
field over the world.
3) Not only tight quality control on products
itself, the more important is the systematic quality control on the
whole supply chain.
4) Fast delivery. Ship out products within 5 days
for all color and material if less than 1000 kg.
5) Spool can be customization but need longer
time.
6) Accept OEM/ODM over the world for large
order.
7) Unconditional return(Buyer need afford
delivery cost if no quality issue)
Though we recommend you using REPRAPPER brand filament, but not
means you must buy from us directly. We also recommend you buy our
reseller in your local region to save the deliver cost. Of course
buying from us also welcome.
In order to get a successful printing journey, you can view the
following tips for reference.
Tips:
How to get a perfect printing
model?
In fact you want to get a perfect printing model, you need a
reliable printer with the 3D printer at right temperature under right
parameter setting. It means that your printer should under good
condition; your filament should be good enough. The following tips are
based on this question.
Tip 1: What is your idea
printing temperature?
In fact different printer series and different printer sensor has
different temperature tolerance. Regardless sensor difference, the
printing temperature of REPRAPPER ABS filament is 200~260℃, the idea
temperature is 230℃. Different color has little variance. The
printing temperature of REPRAPPER T-Glass filament is 170~240℃, the idea
temperature is 210℃. Different color has little variance.
For UP and Afinia printer, you can use it directly under ABS or T-Glass
mode (Depends on what material you bought). For Makerbot etc printer
that allows you change the temperature, you can set a temperature
(e.g. 230℃), then extrude the filament manually before printing. If
you saw the filament can flow up smoothly without bubble, it means
that temperature is ideal setting.
Tips 2 How to avoid printing
parts tilt?
It is very important for the first layer. You want to get a
successful printing model you need to assure the T-Glasstform is leverage.
If the T-Glasstform is not leverage the probability of tilt will increase.
Before you begin your job you need to confirm the nozzle to all
T-Glasstform distance is the same.
The filament can be stick on ABS board/ solderless breadboard/3M
2090 tape/Kapton tape etc.
When you printing, the closer between nozzle to T-Glasstform the better
but should not break the T-Glasstform.
Tips 3. How to avoid T-Glass jam
at nozzle?
We have study on this. The printing temperature and extruder design
are critical on this. If print at high temperature, the T-Glass will soft
and the extruder can not push the soft melt T-Glass out of nozzle because
the filament will not strong enough to push the melted T-Glass. It will
bent. The extruder design also very important, if the inner surface is
not smoothly enough or the diameter is not big enough, it will cause
the same issue. It is not relate with filament itself. At least our
filament can get good printing results.
Tips 4. How to avoid printing
failure?
Before you begin your job, you need to confirm:
1) The filament is good, no clog and with
consistence diameter. Wired well.
2) The filament feed system can feed the filament
smoothly to avoid lack of filament in the extruder during
printing.
During printing you need to confirm:
1) The temperature is ideal and the extruded
filament at nozzle is smoothly without bubble.
2) The first layer is OK as mentioned above.
If you avoid these issue but your still print failure parts, it may
caused by your printer’s reliability. According our experience,
the distinguish of a good printer or bad printer is their reliability.
For FDM mode printer, for one or two model, all printing results is
similar regard the surface. But when print 100 times will them success
100 times is the make difference point. For example, for Z axis
movement, if your setting is 0.2mm, will they move 0.2mm exactly? If
higher than 0.2mm the extruded filament may not stick to the near
bottom printing model. If less than 0.2mm it may make the nozzle touch
the printed model. Both of that will cause failure printing.
Now starting your 3D printing journey!
REPRAPPER,
Beyond Imagination through Innovation!
RepRapper T-Glass Filament
REPRAPPER T-Glass 1.75mm 3D printing filament is one of the best, most
consistent and most tested T-Glass filament that compatible with MakerBot
3D printer, UP 3D printer, Afinia 3D printer, solidoodle 3D
printer.
Specification:
3D printer filament parameter
|
Data
|
Material
|
T-Glass
|
Color
|
Nature
|
Diameter
|
1.75mm
|
Tolerance
|
+/-0.04mm
|
Printing temperature
|
190~240℃
|
Net weight
|
1kg
|
Spool size
|
250mm diameter, 52mm hub, 40mm height
|
Gross weight
|
1.5kg
|
Package
|
Vacuum sealed, individual box
|
Features:
- Straw spool which more environmental friendly and nice appearance.
We are the only one with this spool over the world.
- Filament function not only compatible all 1.75mm 3D printer
without lock key, the spool size also suitable for MakerBot replicator
5th generation.
Why T-Glass?
There are some reasons why you need T-Glass.
- Smooth surface.
- Can be printed with large size without wrapping.
- Environmental friendly that can be biodegrading.
Applicability:
RepRapper T-Glass 3D printing filament compatible with MakerBot 3D
printer, UP 3D printer, Afinia 3D printer, Solidoodle 3D printer etc
who without lock key of their filament with 1.75mm diameter.
Why us?
1) Direct manufacturer, top 3D printer supplier's
top choice.
2) With reputation of innovation on 3D printer
field over the world.
3) Not only tight quality control on products
itself, the more important is the systematic quality control on the
whole supply chain.
4) Fast delivery. Ship out products within 5 days
for all color and material if less than 1000 kg.
5) Spool can be customization but need longer
time.
6) Accept OEM/ODM over the world for large
order.
7) Unconditional return(Buyer need afford
delivery cost if no quality issue)
Though we recommend you using REPRAPPER brand filament, but not
means you must buy from us directly. We also recommend you buy our
reseller in your local region to save the deliver cost. Of course
buying from us also welcome.
In order to get a successful printing journey, you can view the
following tips for reference.
Tips:
How to get a perfect printing
model?
In fact you want to get a perfect printing model, you need a
reliable printer with the 3D printer at right temperature under right
parameter setting. It means that your printer should under good
condition; your filament should be good enough. The following tips are
based on this question.
Tip 1: What is your idea
printing temperature?
In fact different printer series and different printer sensor has
different temperature tolerance. Regardless sensor difference, the
printing temperature of REPRAPPER ABS filament is 200~260℃, the idea
temperature is 230℃. Different color has little variance. The
printing temperature of REPRAPPER T-Glass filament is 170~240℃, the idea
temperature is 210℃. Different color has little variance.
For UP and Afinia printer, you can use it directly under ABS or T-Glass
mode (Depends on what material you bought). For Makerbot etc printer
that allows you change the temperature, you can set a temperature
(e.g. 230℃), then extrude the filament manually before printing. If
you saw the filament can flow up smoothly without bubble, it means
that temperature is ideal setting.
Tips 2 How to avoid printing
parts tilt?
It is very important for the first layer. You want to get a
successful printing model you need to assure the T-Glasstform is leverage.
If the T-Glasstform is not leverage the probability of tilt will increase.
Before you begin your job you need to confirm the nozzle to all
T-Glasstform distance is the same.
The filament can be stick on ABS board/ solderless breadboard/3M
2090 tape/Kapton tape etc.
When you printing, the closer between nozzle to T-Glasstform the better
but should not break the T-Glasstform.
Tips 3. How to avoid T-Glass jam
at nozzle?
We have study on this. The printing temperature and extruder design
are critical on this. If print at high temperature, the T-Glass will soft
and the extruder can not push the soft melt T-Glass out of nozzle because
the filament will not strong enough to push the melted T-Glass. It will
bent. The extruder design also very important, if the inner surface is
not smoothly enough or the diameter is not big enough, it will cause
the same issue. It is not relate with filament itself. At least our
filament can get good printing results.
Tips 4. How to avoid printing
failure?
Before you begin your job, you need to confirm:
1) The filament is good, no clog and with
consistence diameter. Wired well.
2) The filament feed system can feed the filament
smoothly to avoid lack of filament in the extruder during
printing.
During printing you need to confirm:
1) The temperature is ideal and the extruded
filament at nozzle is smoothly without bubble.
2) The first layer is OK as mentioned above.
If you avoid these issue but your still print failure parts, it may
caused by your printer’s reliability. According our experience,
the distinguish of a good printer or bad printer is their reliability.
For FDM mode printer, for one or two model, all printing results is
similar regard the surface. But when print 100 times will them success
100 times is the make difference point. For example, for Z axis
movement, if your setting is 0.2mm, will they move 0.2mm exactly? If
higher than 0.2mm the extruded filament may not stick to the near
bottom printing model. If less than 0.2mm it may make the nozzle touch
the printed model. Both of that will cause failure printing.
Now starting your 3D printing journey!
REPRAPPER,
Beyond Imagination through Innovation!